标准资料网-标准资料免费资源平台

Product Code:SAE J2749
Title:High Strain Rate Tensile Testing of Polymers
Issuing Committee:Plastics Committee
Scope:1. AIMS AND SCOPE1.1 This recommended practice is a guideline for generating high strain rate tensile properties under defined conditionsof unreinforced and reinforced plastics used in the automotive industry. Several types of test specimens areidentified to suit different types of materials and test rates.1.2 This document is intended for strain rates between 10-3/s and 103/s. Test procedures for rates of 10-2/s and below;i.e., quasi-static conditions, are described in ASTM D 638 and ISO 527-1. The procedures in this document includequasi-static testing in order to provide a common test rate for both quasi-static and dynamic test programs. Thegeneral procedures listed in ASTM D 638 and ISO 527-1 should be followed when appropriate.1.3 The main purpose of this document is to determine the relative effects of increasing strain rate on the measuredmaterial properties. Data generated from these tests are comparative in nature. High rate tensile tests will notgenerate basic material properties as accurately as those generated by quasi-static tests.1.4 The scope of this document covers驴 Rigid and semi-rigid thermoplastic molding and extrusion materials, including filled and reinforced compounds inaddition to unfilled types, and驴 Rigid and semi-rigid thermoplastic sheets.Thermosetting materials, rigid cellular materials, and sandwich structures containing cellular material were not evaluatedas part of this document. However, the test procedures may be used as a general guideline for these materials. Thisdocument is not recommended for materials whose internal structure is on the scale of the gage width and length of theselected specimen configuration. Fiber-filled polymers may require additional testing using an alternate sample geometryto establish the effect of strain rate on the measured properties.【英文标准名称】:Testingofvalves-Firetype-testingrequirements
【原文标准名称】:阀门试验.防火试验要求
【标准号】:ISO10497-2010
【标准状态】:现行
【国别】:国际
【发布日期】:2010-02
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC153
【标准类型】:()
【标准水平】:()
【中文主题词】:燃烧特性;耐压强度;定义;防火;耐火性;工业配件;材料;工作性能;压力释放;适用性检验;合格试验;规范(验收);试验;试验条件;试验要求;定型试验;阀门
【英文主题词】:Burningbehaviours;Compressivestrength;Definitions;Fireproofness;Fireresistance;Industrialfittings;Materials;Operatability;Pressurereleases;Proofofsuitability;Qualificationtests;Specification(approval);Testing;Testingconditions;Testingrequirements;Typetesting;Valves
【摘要】:ThisInternationalStandardspecifiesfiretype-testingrequirementsandafiretype-testmethodforconfirmingthepressure-containingcapabilityofavalveunderpressureduringandafterthefiretest.Itisnotapplicabletothetestingrequirementsforvalveactuatorsotherthanmanuallyoperatedgearboxesorsimilarmechanismswhentheseformpartofthenormalvalveassembly.Othertypesofvalveactuators(e.g.electrical,pneumaticorhydraulic)canneedspecialprotectiontooperateintheenvironmentconsideredinthisvalvetest,andthefiretestingofsuchactuatorsisoutsidethescopeofthisInternationalStandard.FiretestcertificatesofvalvespreviouslytestedaccordingtopreviouseditionsofISO10497andtosimilarinternationallyrecognizedfireteststandardsarealsoacceptable.NOTEForthepurposesofthisInternationalStandard,theterms“firetype-test”and“firetest”aresynonymous.
【中国标准分类号】:J16
【国际标准分类号】:23_060_01
【页数】:24P.;A4
【正文语种】:英语